As of January 1, 2020, manufacturers and distributors of lithium ion cells and batteries and equipment powered by cells and batteries are required to provide a Test Summary as specified in the United Nations Manual of Tests and Criteria, Part III, sub-section 38.3, paragraph 38.3.5. It should be noted that the test summary also applies to the cells and batteries contained in equipment when the cell or battery is added to a product.
The Test Summary shall include the information as below; however, there is no defined required format to follow.
Lithium cell or battery test summary in accordance with sub-section 38.3 of Manual of Tests and Criteria |
The following information shall be provided in this test summary: Name of cell, battery, or product manufacturer, as applicable; Cell, battery, or product manufacturer's contact information to include address, phone number, email address and website for more information; Name of the test laboratory to include address, phone number, email address and website for more information; A unique test report identification number; Date of test report; Description of cell or battery to include at a minimum: Lithium ion or lithium metal cell or battery; Mass; Watt-hour rating, or lithium content; Physical description of cell/battery; and Model numbers. List of test conducted and results (i.e., pass/fail); Reference to assembled battery testing requirements, if applicable (i.e. 38.3.3(f) and 38.3.3(g)); Reference to the revised edition of the Manual of Test and Criteria used and to amendments thereto, if any; and Signature with name and title of signatory as an indication of the validity of information provided |
For More Information About This Story
On December 2, 2019, the Ministry of Commerce and Industry issued notification No.33/2015-2020 to amend the import policy for toys distributed in India. This was effective immediately.
According to the amendment, the requirement of testing toys at laboratories accredited by the India’s National Accreditation Board for Testing and Calibration Laboratories (NABL) has been removed. Instead, the authority will randomly select samples from each consignment arriving in India and sent them to NABL accredited laboratories for clearance. Failure in complying to the BIS (Bureau of Indian Standards) toy standards may result in the consignment being sent back or destroyed at the cost of the importer. The example of BIS toy standards are shown as below.
IS 9873-1: Safety aspects related to mechanical and physical properties
IS 9873-2: Flammability
IS 9873-3: Migration of Certain elements
IS 9873-4: Swings, slides and similar activities - toys for indoor and outdoor family domestic use
IS 9873-7: Requirements and test methods for finger paints
IS 9873-9: Certain phthalates in toys and children’s products
IS 15644: Electric toys
For More Information About This Story
On September 30, 2019, the Minister of Science and Technology of Vietnam approved QCVN 3:2019/BKHCN Technical Regulations for Toy Safety.
The key amendments to the Technical Regulation on Toy Safety are summarized below:
Revised the version of standards for physical and mechanical properties, flammability and migration of certain elements:
Requirements | QCVN 3:2019/BKHCN (Effective January 1, 2021) | QCVN 3:2009/BKHCN (Current version) |
Physical and mechanical properties | TCVN 6238-1: 2017 (ISO 8124-1: 2014) | TCVN 6238-1:2008 (ISO 8124-1:2000) |
Flammability | TCVN 6238-2: 2017 (ISO 8124-2: 2014) | TCVN 6238-2:2008 (ISO 8124-2:2007) |
Migration of certain elements | TCVN 6238-3:2011 (ISO 8124-3:2010) | TCVN 6238-3:2008 (ISO 8124-3:1997) |
Introduced Phthalates requirements (BBP, DBP and DEHP for all toys, and DIDP, DINP and DNOP for toys, which can be placed in the mouth)
Updated the toy labeling requirements in accordance with Decree No. 43/2017/ND-CP of April 14, 2017
The new Technical Regulation will come into force on January 1, 2021. Toys that are tested and comply with Technical Regulation,QCVN 3:2009/BKHCN, can be sold in the market until December 31, 2021.
For More Information About This Story
On December 1, 2019, the Hong Kong Government proposed the adoption of up-to-date safety standards for toys and certain children’s products listed in Schedule 2 under the Toys and Children’s Products Safety Ordinance (Cap 424).
The Toys and Children’s Products Safety Ordinance stipulates that a person must not manufacture, import or supply a toy or Schedule 2 product unless it complies with all the applicable requirements contained in any one of the safety standards specified in Schedules 1 and 2 respectively in the Ordinance. The standards specified are international standards adopted by major economies.
Schedule 1 Toy Standard
Current Standard | Proposed substitute standards |
ISO 8124-3:2010 (incorporating Amendment 1:2014) | ISO 8124-3:2010 (incorporating Amendment 2:2018) |
ISO 8124-4:2014 (incorporating Amendment 1:2017) | ISO 8124-4:2014 (incorporating Amendment 2:2019) |
BS EN 71-1:2014 | BS EN 71-1:2014 + A1:2018 |
BS EN 71-3:2013 + A3:2018 | BS EN 71-3:2019 |
BS EN 71-14:2014 + A1:2017 | BS EN 71-14:2018 |
Schedule 2 Children’s Product Standard
Current Standard | Proposed substitute standards |
Babies’ Dummies | |
BS EN 1400:2013 + A1:2014 | BS EN 1400:2013 + A2:2018 |
Baby Walking Frames | |
ASTM F977-12 | ASTM F977-18 |
Child Safety Barriers For Domestic Use | |
ASTM F1004-18 | ASTM F1004-19 |
Children’s Cots For Domestic Use | |
ASTM F1169-13 | ASTM F1169-19 |
ISO 7175-1:1997 | ISO 7175-1:2019 |
ISO 7175-2:1997 | ISO 7175-2:2019 |
Children’s High Chairs and Multi-purpose High Chairs For Domestic Use | |
ASTM F404-18 | ASTM F404-18a |
Children’s Paints | |
BS EN71-3:2013 + A3:2018 | BS EN71-3:2019 |
ISO 8124-3:2010 (incorporating Amendment 1:2014) | ISO 8124-3:2010 (incorporating Amendment 2:2018) |
Playpens For Domestic Use | |
ASTM F406-17 | ASTM F406-19 |
Wheeled Child Conveyances | |
BS EN 1888:2012 | BS EN 1888-1:2018 and BS EN 1888-2:2018 |
ASTM F833-15 | ASTM F833-19 |
For More Information About This Story
Na Austrália, quando forem identificados perigos em produtos de consumo, eles serão recolhidos e publicados no Banco de Dados de Recalls e Alertas de Segurança no site da Australian Competition & Consumer Commission, que é atualizado diariamente. Os recalls da Austrália de 2 de junho de 2019 a 29 de novembro de 2019 estão resumidos abaixo:
Perigos | Frequência |
Risco de lesões | 24 |
Risco de incêndio | 23 |
Risco de asfixia | 20 |
Risco de queimadura | 10 |
Risco de sufocamento | 8 |
Outros perigos* | 32 |
*Outros perigos incluem perigo alérgico, perigo químico, perigo de afogamento, perigo de choque elétrico, perigo elétrico, perigo de aprisionamento, perigo de queda, perigo de ingestão, perigo de laceração e perigo de estrangulamento com uma frequência inferior a 7.
Categorias de produtos | Frequência |
Artigos sobre brinquedos e cuidados infantis | 28 |
Tecido / Têxtil / Vestuário / Têxtil doméstico | 22 |
Móveis | 9 |
Cosméticos / Cuidados com o corpo | 6 |
Artigos esportivos / Equipamentos | 5 |
Outras categorias^ | 23 |
Outras categorias incluem Velas e itens para queima e acessórios, Computador / Áudio / Vídeo / Outros eletrônicos e acessórios, Óculos, Material para contato com alimentos, Eletrodomésticos (secador de cabelo, ferro de passar, etc.), Artigos para casa, Equipamentos de iluminação e Suprimentos para animais de estimação com frequência inferior a 5.
Para obter uma lista completa, clique aqui
Assine nossas Atualizações Regulatórias
Cancelar a assinatura a qualquer momento. Leia nossa política de privacidade.