October 2021



North America News

The Food and Drug Administration (FDA) issued a Revised Policy on Face Masks and Respirators during COVID-19. This document published in September 2021 supersedes “Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency (Revised)” issued in May 2020.

The FDA originally issued this guidance to provide a policy to help expand the availability of face masks, barrier face coverings, and face shields for the general public, including healthcare personnel (HCP), and surgical masks and particulate filtering facepiece respirators (FFRs) (including N95 respirators) for HCP for the duration of the COVID-19 public health emergency.

The FDA revised this guidance to:

  • Include barrier face coverings intended for a medical purpose but not intended to provide liquid barrier protection within the scope of this guidance.

  • Provide recommendations about submicron particulate filtration efficiency, airflow resistance, and leakage assessments for barrier face coverings as described in ASTM F3502-21: Standard Specification for Barrier Face Coverings.

  • Remove reference to alternatives when FDA-cleared or NIOSH-approved N95 respirators are not available based on current recommendations that healthcare facilities should not be using crisis capacity strategies at the time of issuance of this guidance.

  • Add a policy that, during the public health emergency, the FDA generally does not intend to object to stockpiled, non-NIOSH-approved respirators being further distributed and used as face masks for source control (as opposed to being used as FFRs for respiratory protection) where such use does not create an undue risk in light of the public health emergency. More information is included in the guidance.

For details of Guidance, please visit the link : https://www.fda.gov/regulatory-information/search-fda-guidance-documents/enforcement-policy-face-masks-barrier-face-coverings-face-shields-surgical-masks-and-respirators

If you have questions about this guidance, please contact Division of Industry and Consumer Education (DICE) with the link: https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance/contact-us-division-industry-and-consumer-education-dice?utm_medium=email&utm_source=govdelivery


For More Information About This Story

The New York State Department of Environmental Conservation (NYSDEC) held a virtual meeting on 15 September 2021 about the chemicals being considered for listing as Chemicals of Concern and High Priority Chemicals and their practical quantification limits (PQLs) under New York’s Toxic Chemicals in Children’s Products Regulations. Public comments can be submitted until 15 October 2021.

New York’s Environmental Conservation Law (ECL) Article 37 Title 9 establishes an ingredient disclosure program and prohibits certain chemicals in children’s products. Under the law, lists of chemicals of concern and high priority chemicals should be promulgated by 1 March 2022 by NYSDEC and those chemicals must be disclosed if present in children's products. Additionally, children’s products containing benzene, asbestos, or tris(1,3-dichloro-2-propyl) phosphate are also prohibited for sale effective 1 January 2023.

A rule to implement portions of the law is under development by NYSDEC. It is expected the rule would address the product categories to be covered, what specific information must be disclosed, details on the waiver procedures, and so on.

A virtual meeting to present and discuss the chemicals under consideration for listing as Chemicals of Concern and High Priority Chemicals and their practical quantification limits was held on 15 September 2021 by NYSDEC. It is now under a 30-day public comment until 15 October 2021 to allow stakeholders to comment.


For More Information About This Story

On 3 August 2021, Santa Rosa approved a new Zero Waste Food Ware Ordinance to prohibit per- and polyfluoroalkyl substances (PFAS) in food ware and/or food ware accessories.

On 3 August 2021, the city of Santa Rosa in California, approved a new Zero Waste Food Ware Ordinance to reduce the community’s use and disposal of single-use food ware and food ware accessories.

According to the new Zero Waste Food Ordinance, the following applies within Santa Rosa and becomes effective on 1 January 2022:

  • Any food service ware containing polystyrene foam is prohibited.

  • Any food service ware containing PFAS is prohibited.

  • Food service facilities are required to provide plastic food ware accessories (straws, lids, cutlery, stir sticks, to-go condiments, etc.) upon request only.

  • ‘Food ware’ means all containers, boxes, bowls, cups, lids, plates, trays and other similar items that are used for prepared foods.

  • ‘Food ware accessories’ means types of items usually provided alongside prepared food, including but not limited to beverage trays, chopsticks, spoons, stirrers, straws, toothpicks and wrappers.


For More Information About This Story

The state of Utah passed bill HB314 that introduced sterilization requirements for filling materials of animal origin, like wool, shoddy, down and feathers. Effective date for sterilization permit number on quilted clothing textile label is 1 January 2022.

In 2016, the state of Utah passed bill HB314 that introduced sterilization requirements for filling materials of animal origin, like wool, shoddy, down and feathers for quilted clothing.

The sterilization requirements were implemented in the Act by a revision to the Utah Administrative code regulation by the Utah Department of Agriculture and Food (UDAF) Code 70-101 Bedding, Upholstered Furniture and Quilted Clothing. The revision included a five year phase-in timeframe beginning 1 January 2017, in which the sterilization permit number on the textile label should be included in order for quilted clothing manufacturers to comply with the sterilization requirements.

Effective 1 January 2022, a sterilization permit number will be required on the textile label for quilted clothing with filling material of animal origin. According to Utah’s Bedding, Upholstered Furniture and Quilted Clothing Inspection Act, “quilted clothing” is defined as padded clothing or apparel.

The State of Utah’s Bedding, Upholstered Furniture and Quilted Clothing Inspection Act applies to all bedding, upholstered furniture, and clothing made in whole or in part with filling material. Filling materials may include cotton, wool, feather and down, rubber, foam, hair, man-made or synthetic fibers and their by-products, and even vegetable fibers, seeds, etc.


For More Information About This Story

In the US, when hazards are identified in consumer products, they will be recalled and published in the Consumer Product Safety Commission (CPSC) Recent Recalls on the CPSC website, which is updated daily. The US recalls from 01 September 2021 to 30 September 2021 are summarized below:

Hazards

Frequency

Laceration Hazard

2

Injury Hazard

2

Fall Hazard

4

Health Risk Hazard

1

Fire Hazard

2

Drowning Hazard

1

Suffocation Hazard

1

Product Categories

Frequency

Pet Items

1

Sporting Goods / Equipment

4

Toys and Childcare Products

3

Furniture

1

Tools and Hardware

1

Electrical Appliances

1

Food

1

Outdoor Living Items

1

For a complete list click here

In Canada, when hazards are identified in consumer products, they will be recalled and published in the Recalls and Safety Alerts Database on the Health Canada website, which is updated daily. The Canada recalls from 01 September 2021 to 30 September 2021 are summarized below:

Hazards

Frequency

Fall Hazard

4

Burn Hazard

3

Injury Hazard

3

Ingestion Hazard

2

Fire Hazard

4

Suffocation Hazard

2

Other Hazards*

6

*Other Hazards include Laceration Hazard, Tip-Over Hazard, Entrapment Hazard, Carbon Monoxide Leaking Hazard, Chemical Hazard and Choking Hazard with a frequency of less than 2.

Product Categories

Frequency

Toys and Childcare Products

7

Furniture

2

Sporting Goods / Equipment

3

Household Items

2

Other Categories*

6

*Other Categories include Pet Items, Bodycare / Cosmetics, Electrical Appliances, Fabric / Textile / Garment / Home Textile, Outdoor Living Items and Chemicals with a frequency of less than 2. For a complete list click here

Europe News

On 24 August 2021, the UK updated the Guidance of Placing manufactured goods on the market in Great Britain. Businesses can continue to use the CE marking for goods placed on the market in Great Britain (GB) until 1 January 2023.

The UK earlier announced that goods (previously requiring a CE mark) being placed on the market in GB would be required to be labelled with a UKCA mark after Brexit.

On 24 August 2021, there was a new update from the UK. This update was implemented to allow businesses time to adjust. CE marked goods in scope of the guidance that meet EU requirements (which match UK requirements) can continue to be placed on the GB market until 1 January 2023. This includes goods which have been assessed by an EU recognized notified body.

The UKCA mark must be used for placing goods on the GB market from 1 January 2023.


For More Information About This Story

In July 2021, the German Federal Institute for Risk Assessment (BfR) published its latest recommendation on commodities based on natural and synthetic rubber.

The recommendations on the health assessment of food contact materials have been issued by the German Federal Institute for Risk Assessment (BfR) and its predecessors since 1958. These Recommendations represent the current state of the scientific and technical knowledge on food contact polymers, such as plastic, silicone and rubber.

In July 2021, BfR published three recommendations on commodities based on natural and synthetic rubber:

  • BfR XXI: Commodities based on natural and synthetic rubber

  • BfR XXI/1: Commodities based on natural and synthetic rubber in contact with food

  • BfR XXI/2: Special consumer goods made of natural and synthetic rubber and of latices made of natural and synthetic rubber (formerly special category)

In addition, ‘BfR XXI/3: Consumer goods made of cross-linked thermoplastic elastomer’ is under preparation.

Highlights of the three recommendations are as follows:

Recommendation

Summary

BfR XXI

Explains the structure of the Recommendations on commodities based on natural and synthetic rubber and the procedure for the inclusion of new substances.

Lists the evaluated substances for the manufacture of the products according to Recommendations XXI/1 and XXI/2.

BfR XXI/1

Classifies commodities based on natural and synthetic rubber into four categories.

Sets restriction for each category.

BfR XXI/2

Applies to special consumer goods (e.g., toys, mouth contact articles) made of natural and synthetic rubber.

Sets restriction for these articles.


For More Information About This Story

In Europe, when hazards are identified in Non-food Consumer Products, the Products will be recalled and published in the Safety Gate system, which is updated weekly. The European recalls from 01 September 2021 to 30 September 2021 are summarized below:

Hazards

Frequency

Electric Shock Hazard

20

Choking Hazard

10

Health Risk Hazard

6

Chemical Hazard

26

Fire Hazard

15

Burn Hazard

18

Injury Hazard

9

Damage to Hearing

4

Damage to Sight

6

Other Hazards*

7

*Other Hazards include Microbiological Hazard, Strangulation Hazard, Cut Hazard, Environmental Hazard and Drowning Hazard with a frequency of less than 4.

Product Categories

Frequency

Electrical Appliances

21

Toys and Childcare Products

29

Protective Equipment

3

Jewelry

3

Bodycare / Cosmetics

6

Fabric / Textile / Garment / Home Textile

4

Tools and Hardware

6

Outdoor Living Items

8

Other Categories*

8

*Other Categories include Home Electrical Appliances, Footwear, Computer / Audio / Video / Other Electronics & Accessories, Pet Items and Sporting Goods / Equipment with a frequency of less than 3.

Notifying Country

Frequency

Italy

10

Hungary

16

Germany

8

Ireland

3

Cyprus

12

Czechia

6

Poland

9

Denmark

6

Belgium

3

Other Countries*

15

*Other Countries include Slovenia, Spain, Austria, Bulgaria, Croatia, Lithuania, France, The Netherlands, Finland and Romania with a frequency of less than 3.

For a complete list click here

Asia News

Em 10 de março de 2021, a Saudi Standardization, Metrology and Quality Organization SASO publicou uma lista de produtos que deverão obter o certificado de reconhecimento nacional aplicável para equipamentos e componentes elétricos(IECEE) ou o certificado de reconhecimento nacional para equipamentos e dispositivos usados em atmosferas potencialmente explosivas (IECEX), a partir de 1º de novembro de 2021.

A Organização Saudita de Normas, Metrologia e Qualidade anunciou que, a partir de 1º de novembro de 2021, os fabricantes e fornecedores são obrigados a obter o "IECEE", bem como o "IECEX", conforme aplicável, para permitir a entrada de determinados produtos na alfândega para circular no mercado do Reino.

As normas sauditas exigem que os fornecedores e fabricantes obtenham certificados de reconhecimento nacional "IECEE" para equipamentos e componentes elétricos dos seguintes produtos: disjuntores, cabos de carregadores de celulares, barbeadores elétricos e computadores de mesa (PC).

As normas sauditas também exigem que os fornecedores e fabricantes obtenham certificados de reconhecimento nacional "IECEX" para equipamentos e dispositivos usados em atmosferas potencialmente explosivas para os seguintes produtos: caixas de junção com pontos de conexão de cabos (pontos de passagem de fios), pontos de caixa de controle com conexões de cabos, detectores e sensores de gás, sistemas de detecção de gás, plugues elétricos e outros dispositivos de conexão, bombas elétricas e iluminação linear (fixa).

As "Normas Sauditas" confirmaram que os fornecedores e fabricantes são obrigados a obter esses certificados de aprovação nacional para os produtos listados, em um esforço para controlar os produtos de alto risco que entram no mercado e protegê-lo de equipamentos inferiores ou produtos falsificados. Além disso, isso ajudaria a garantir a aplicação das regulamentações sauditas para proteger os consumidores de produtos importados que não atendem às normas e especificações que verificam a segurança do produto, para minimizar acidentes e permitir que os produtos passem pelo porto alfandegário sem inspeção e testes repetidos.

Link: https://www.saso.gov.sa/ar/mediacenter/news/Pages/saso_news_1230.aspx


For More Information About This Story

On 2 September 2021, China’s MIIT published three revised amendments to GB 19865-2005, GB 6675.2-2014 and GB 6675.11-2014. Publicly solicited opinions were required to be submitted before 8 October 2021.

The key amendments of GB19865-2005: Electric Toys Safety include the following points:

  1. Regarding the amendments to the relevant clauses of the “Battery Box”, including clauses “7.1.1” and “7.4”, it clarifies:

    1. The product structure of the battery box designed to prevent the replacement of the battery box of other battery boxes or power supply does not need to be marked with “DC symbol”;

    2. There is no necessary to declare the situation that “toys cannot be connected to more than the recommended number of power sources”.

  2. Clause “9.4” exempts the requirements for “The battery compartment that can open the battery cover with the aid of tools or at least two independent actions at the same time”.

The key amendments of GB6675.2-2014: Safety of Toys -- Part 2: Mechanical and Physical Properties include the following points:

  1. Corrects typos within the standard;

  2. Provides applicable conditions and the corresponding test method modification of requirements in clause 4.18 Projectile Toys.

The key amendments of GB6675.11-2014: Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use include the following points:

  1. Modifications involving “4.7.7 Minimum distance between swing element and the ground”.

  2. Amends criteria from “outer diameter 330 mm” to ”diameter shall not be over 210 mm”


For More Information About This Story

In China, when hazards are identified in consumer products, they will be recalled and published in the SAMR Defective Product Administrative Centre, which is updated daily. The China recalls from 01 September 2021 to 30 September 2021 are summarized below:

Hazards

Frequency

Safety Risk Hazard

22

Electric Shock Hazard

11

Cut Hazard

2

Health Risk Hazard

3

Fire Hazard

14

Chemical Hazard

2

Burn Hazard

3

Fall Hazard

1

Product Categories

Frequency

Protective Equipment

3

Electrical Appliances

21

Home Electrical Appliances

4

Sporting Goods / Equipment

4

Footwear

2

Food Contact Material

5

Toys and Childcare Products

2

Other Categories*

4

*Other Categories include Jewelry, Stationery, Household Items and Tools and Hardware with a frequency of less than 2.

Provinces

Frequency

Anhui

10

Tianjin

2

Jiangsu

4

Shanghai

2

Guangdong

17

Sichuan

6

Other Provinces*

4

*Other Provinces include Beijing, Jiangxi, Fujian and Guangzhou with a frequency of less than 2.

For a complete list click here

Australia/New Zealand News

Na Austrália, quando forem identificados perigos em produtos de consumo, eles serão recolhidos e publicados no Banco de Dados de Recalls e Alertas de Segurança no site da Australian Competition & Consumer Commission, que é atualizado diariamente. Os recalls da Austrália de 1º de setembro de 2021 a 30 de setembro de 2021 estão resumidos abaixo:

Perigos

Frequência

Risco à saúde Perigo

5

Risco de alergia

4

Risco de queimadura

2

Risco de asfixia

4

Risco de lesões

13

Risco de sufocamento

2

Outros perigos*

4

*Outros perigos incluem perigo microbiano, perigo de envenenamento, perigo de choque elétrico e perigo de incêndio com uma frequência inferior a 2.

Categorias de produtos

Frequência

Farmácia

2

Alimentos

12

Eletrodomésticos

5

Brinquedos e produtos para cuidados infantis

2

Artigos esportivos / Equipamentos

2

Outras categorias*

4

*Outras categorias incluem artigos para o lar, ferramentas e ferragens, móveis e cuidados com o corpo/cosméticos com frequência inferior a 2.

Para obter uma lista completa, clique aqui

Assine nossas Atualizações Regulatórias

Cancelar a assinatura a qualquer momento. Leia nossa política de privacidade.